Benefits of 3D pillow

3D pillows are 100% refers to the use of 3D stereoscopic fiber (commonly known as the 3D spacer fabric) made a new pillow, which overcomes the traditional pillow core material can not be cleaned, airtight, moisture-proof mildew and no defects, and the elastic support force and resistance to pressures have shown a strong advantage, is a breakthrough product. Double supporting 3D special care pillow can firmly support the people of the cervical spine, thus dispersing the cervical pressure, so that even patients with cervical spondylosis also be easy to sleep.

1.Ventilation, warm in winter and cool in summer

Reasons: hollow three-dimensional structure, double face mesh, six face ventilation, inside the hollow three-dimensional structure formed a layer of air micro circulation, summer human sleep up will feel dry, and winter is warm.
Benefits: take away the sweat and moisture, keep skin is not wet, and dry material contact surface, not frequent move.

2.  Gentle and considerate－－3D zero pressure 4800L/S.M2

Reason: in the middle by a million high elastic functional fibers through the "C" or "-90 X" cross support (40 fiber /cm2), the support is very delicate, is 800 times the spring bed.
Benefits: fit the human body skeleton curve, hold holding concave part, inclusive protruding parts, bring the practical consideration of feeling; contact with the head, cervical counter force to "0", does not produce blood circulation disorder, body fully relaxed, free from oppression, restful sleep comprehensively in order to release the pressure.

3.  Double mesh, ventilation humidity, washing drying

Reason: the use of functional fiber, not moisture, not easy to react with oil pollution.
Benefits: convenient washing, easy to dry; keep the material clean, not easy to breed bacteria, mites.

4. Environmental protection non-toxic

Reason: the functional fiber (modified polyester fiber), full combustion of carbon dioxide and water, 100% recycling, formaldehyde free and odor.
Benefits: no impact on the human body and the environment.

5. Easy to carry

Reason: the material itself hollow three-dimensional structure.
Benefits:easy to carry.

From Quanzhou Wellcool Cushion Technology CO, LTD. Official website: http://www.wellcool3d.com/

What is 3d mesh?

3D mesh, it is a kind of high-elasticity, high-density knitting textile. Unlike traditional textile which is complanate,it is three-dimention.

Its upper and lower side are meshes, and the middle is the unique X-90 structure made of polyester, giving it the outstanding support force, velitation and washable functions.

1. Pressure distribution: reduce 50%

3D mesh has millions points to support human body. There are about 40 support points within 1 cm2 and its support density is as 800 times as spring's. Support every point of the spine, prevent it from distortion.

2. Air permeability: 4800L/S.M2

The middle hollow structure, with upper and low mesh makes it ventilate in six sides. It is measured that the quantity of air passing through it in 1 second each m2 is 4800L.

3. Easy to wash and quick to dry

It is made of 100% polyester, which is hard to react with dirtiness. The unique middle hollow structure enable water to pass through easily.

4. Environment friendly

Wellcool 3D is approved by the national ministry of science and technology: "green nontoxic" "resource conservation" "international advanced new materials.

5. Easy to carry

3D can be roll, convenient to carry.

 From Quanzhou Wellcool Cushion Technology CO, LTD. Official website: http://www.wellcool3d.com/

3d mesh for 3d mattress--SF0520

The car cushion and ventilation system material--3D mesh

    3D mesh have some features a lot of people know. Like washable, breathable, high elasticity, strong support, moistureproof, anti static and so on. In addition, it made from 100% polyester, nontoxic. These characteristics make it widely used in various fields, also include automotive industry.

    Now in the automotive industry 3D mesh is the most used car cushion and ventilation system. Why the current automobile industry is more and more inclined to choose 3D mesh  to replace other materials? Firstly, 3D mesh made of 100% polyester, this material which has a very high strength and abrasion resistance. Secondly, it’s have high light fastness and heat resistance, melting point is 258~263 and softening point is 240. Thirdly, it’s moistureproof. In standard condition, regain is 0.4% .

    3D mesh have different mesh, thickness and soft hardness. Different thickness and soft hardness it’s support performance is not the same, and different mesh the air permeability also not the same. In the automotive industry 3D mesh selection generally pay attention to the following points:

    Car cushion: Used to car cushion, universal property will be relatively high. At present, a lot of 3d mesh can be used as cushion, it’s most important requirement is support stronger performance.

    Car ventilation system: 3D mesh’s thickness not too thick nor too thin, around 10mm will be more appropriate. And, the mesh should be a litter bigger to be able to better ventilation. At the same time, it’s also need support stronger performance.

From Quanzhou Wellcool Cushion Technolgy CO, LTD. Official website: http://www.wellcool3d.com/